LS104 - RATIOMETER Controlled Unit
LS104
Ratiometer Controlled Unit
| The LS104 Basic is a highly efficient Flow ProportionalDosing unit, used by many pipeline contractors for both mains and coil disinfections, and boosting chlorine residuals within supply. The unit is designed for both battery and mains power operation, and comes complete with a self monitoring battery charger, and 110volt power lead. The LS104 unit has been designed so that new or repaired mains containing high chlorine residuals for sterilisation can be de-chlorinated in a safe, and efficient manner. This basic model is designed to operate via a bypass without a back pressure requirement, and benefits from an automated Flush / Prime function. |
|
| Power | 12v Battery (min 8hrs running time / battery pack full charge) and /or 110v Mains |
| Dose Capacity | 0.1ppm to 100ppm (standard spec) |
| Flow Capacity | MINIMUM = 11 ltrs/min MAXIMUM = 500 Ltrs/min |
| Pressure Capacity | Dependent upon Dose Pump Spec (No minimum pressure required) |
| Control Type | FLOW PROPORTIONAL Control Via LSL Ratiometer |
| Dimensions | Height = 88cm x Width = 80cm x Depth = 35cm |
| Weight | LS104 = 37 Kgs LS104 Battery Pack = 11kgs |
LS104 S - SMART Controlled Unit
LS104
with FLOW COMPUTER Controller
SMART Controlled Unit
| The LS104 S has all the same operational capacity of the Basic LS104, but with the added benefits of the LSL FLOW COMPUTER, functions such as remote control and monitoring of dosing parameters, along with providing and automated audit trail for individual dosing procedures is also provided. As with the LS104, the SMART unit is also a highly efficient Flow Proportional Dosing unit, used by many pipeline contractors for both mains and coil disinfections, and boosting chlorine residuals within supply. The unit is designed for both battery and mains power operation, and comes complete with a self monitoring battery charger and 110volt power lead. The LS104 unit has been designed so that new or repaired mains containing high chlorine residuals for sterilisation can be de-chlorinated in a safe and efficient manner. This LS104 S model is designed to operate via a bypass or via external flow meter signals such as Pulsed or mA. As with the Basic 104 is does not require any back pressure to operate, and benefits from an automated Flush / Prime function. |
|
| Power | 12v Battery (min 8hrs running time / battery pack full charge) and /or 110v Mains |
| Dose Capacity | 0.1ppm to 100ppm (standard spec) |
| Flow Capacity | MINIMUM = 11 ltrs/min MAXIMUM = 500 Ltrs/min |
| Pressure Capacity | Dependent upon Dose Pump Spec (No minimum pressure required) |
| Control Type | FLOW PROPORTIONAL Control Via LSL FLOW COMPUETR controller |
| Dimensions | Height = 88cm x Width = 80cm x Depth = 35cm |
| Weight | LS104 = 37 Kgs LS104 Battery Pack = 11kgs |
LS105 - Rationmeter Controlled Unit
LS105 - Ratiometer Controlled Unit
| The LS105 Basic is similar in design to the highly efficient LS104 Flow Proportional Dosing unit. The unit differences are the LS 105 is battery powered only , and comes without a flow monitor display. as with the LS104 unit, the LS105 has been designed so that new or repaired mains containing high chlorine residuals for sterilisation can be de-chlorinated in a safe, and efficient manner. This basic model is designed to operate via a bypass without a back pressure requirement, and benefits from an automated Flush / Prime function. |
|
| Power | 12v Battery Only (min 8hrs running time / battery pack full charge) |
| Dose Capacity | 0.1ppm to 100ppm (standard spec) |
| Flow Capacity | MINIMUM = 11 ltrs/min MAXIMUM = 500 Ltrs/min |
| Pressure Capacity | Dependent upon Dose Pump Spec (No minimum pressure required) |
| Control Type | FLOW PROPORTIONAL Control Via LSL Ratiometer Interface |
| Dimensions | Height = 88cm x Width = 80cm x Depth = 35cm |
| Weight | LS105 Unit = 36 kgs LS105 Battery Pack = 11kgs |
HB-43 - Non Flow Proportional Unit
HB - 43 Non Flow Proportional Unit
| The LSL HB-43 Portable Direct Injection Chlorination unit, currently used within both the Anglian Water and Thames Water Mains Rehab contracts, has been designed to replace the old Polson/Mid Kent systems, which are no longer manufactured. There are various specifications of the HB43 unit that can be supplied by LSL, the design specification is dependent on your advised operating parameters and dosing set point requirements. The HB-43 can be powered via the HB Battery Packs, or alternatively, the in-car charger cable can also be used to power the unit. |
|
| Power | 12v Battery Only (8hrs running time/batt pack full charge) |
| Dose Capacity | 0.1ppm to 100ppm (standard spec) |
| Flow Capacity | Non-Flow Proportional Unit |
| Pressure Capacity | Dependent upon Dose Pump Spec (No minimum pressure required) |
| Control Type | Manual Control Via Dose Pump Interface |
| Dimensions | Height = 56cm x Width = 40cm x Depth = 34cm |
| Weight | 13.6 Kgs |



.jpg)