LSL100T RATIOMETER Controlled Unit
LSL MOBILE - LS100T
Trailer Mounted Flow Proportional Chlorination Unit
![]() |
![]() |
|
The LSL100T with Ratiometer dosing control can be used to chlorinate at any point throughout the distribution network, via an internal bypass flow line via Hydrant x Valve x Hydrant (OxO).
Many Mains Rehab Contractors throughout the UK use the LSL100T for mains Chlorination and Dechlorination procedures on both New and Repaired water mains.
The increased operational capacity of the LS100T make it ideal for larger applications, such as trunk mains and where long periods of dosing are required. The LSL100T can also perform Direct Injection dosing via a single dosing point on the main, especially useful in areas where an OxO (Hydrant Valve Hydrant) bypass is not available.
| Power | 24v Battery Only (min 48hrs running time / batt pack full charge) and 110v Mains |
| Dose Capacity | 0.1ppm to 100ppm (standard spec) |
| Flow Capacity | MINIMUM = 11 ltrs/min MAXIMUM = 1100 Ltrs/min |
| Pressure Capacity | Dependent upon Dose Pump Spec (No minimum pressure required) |
| Control Type | FLOW PROPORTIONAL Control via LSL Ratiometer |
| Dimensions | Height = 114cm x Width = 152cm x Depth = 323cm |
| Weight | Trailer = 580Kgs approx Trailer Nose Weight = Does Not Exceed 50Kgs |
LSL100T S DB SMART Controlled Unit
LSL MOBILE - LSL100T ’S’ DB
with LSL FLOW COMPUTER Controller
Trailer Mounted Flow Proportional Chlorination Unit
|
![]() |
|
The LSL100T ’S’ DB uses the LSL FLOW COMPUTER to control dosing and is designed to chlorinate flow proportionally at any point throughout the distribution network, either by using external Pulsed or mA flow meter control signals within the network , or alternatively, the LSL100T ’S’ DB can use an on-board insertion flow meter (e.g. Aqua Probe Type), or conventional Hydrant x Valve x Hydrant (OxO) dosing can be carried out using the internal bypass flow line.
The increased functionality of the LSL100T ’S’ DB make it ideal for larger applications such as trunk mains, and is highly effective as a contingency for water treatment works back up, or where precise chlorine residual boosting is required on a temporary basis.
The LSL Flow Computer provides the LSL100T ’S’ DB with the benefit of on-board monitoring of the dosing parameters, and when used with Smart Card control, the system can be easily controlled and monitored remotely, with a complete automated audit trail being provided for Emergency and planned strategic chlorine residual boosting operations within the distribution network.
| Power | 24v Battery Only (min 48hrs running time / battery pack full charge) and 110v Mains |
| Dose Capacity | 0.1ppm to 100ppm (standard spec) |
| Flow Capacity | MINIMUM = 11 ltrs/min MAXIMUM = 1100 Ltrs/min |
| Pressure Capacity | Dependent upon Dose Pump Spec (No minimum pressure required) |
| Control Type | FLOW PROPORTIONAL Control via LSL FLOW COMPUTER Controller |
| Dimensions | Height = 114cm x Width = 152cm x Depth = 323cm |
| Weight | Trailer = 580Kgs approx Trailer Nose Weight = Does Not Exceed 50Kgs |

